12/24V 15A rectifier with repair function 8 charging stages EPCBC03

This charger offers advanced charging features from EINPARTS. Powered by 230V AC, it offers 12/24V output, ensuring versatile charging. The charger is ideal for charging batteries in cars with START/STOP engines. Technical data:

• Power supply: 230V AC
• Output Voltage: 12/24V
• Output Current: Max 15A
• Maximum load power: 130W
• No load power: 3.2W
• Cooling System: Fan
• Dimensions: 17.5x13.5x7.5cm.
• Voltage identification for 12V: 8V - 14.5V
• Voltage identification for 24V: 18V - 29V
• Output cable length: 120 cm
• Input cable length: 140 cm

Battery Assessment - Examination of the battery charge status and verification of correct connections to the charger. Phase 2: Desulfation - Identifying a battery with sulfate buildup. Low-voltage, high-current pulse charging removes sulfate from the electrodes, restoring the battery's original capacity. Phase 3: Health Check - Checks whether the battery is not damaged and is capable of accepting the charging current. This prevents charging a damaged battery. Phase 4: Soft Start - The undamaged battery begins charging at a low current (approximately 15%), gradually increasing its current. Phase 5: Main Charge - Charges the battery with a maximum constant current, automatically adjusted depending on the charge state, until it reaches 80% capacity. Phase 6: Final Charge - Charging with a decreasing current and constant voltage until the battery is fully charged (100%). Phase 7: Charge Test - Approximately two minutes of testing to ensure the battery retains its charge after charging. If so, charging is complete. Phase 8: Voltage Maintenance - Monitors battery voltage and maintains optimal charge at 95-100% capacity using current pulses.