eSUN PLA-Basic

eSUN PLA-Basic. Printing material: Polylactic acid (PLA), Printing colours: Black, Print speed: 300 mm/sec. Weight: 1 kg, Density: 1240 kg/m³, Diameter: 1.75 mm. Quantity per pack: 1 pc(s)

A low-cost basic printing consumable based on modified PLA. While maintaining its environmental characteristics, the added special materials enhances the fluidity and fast printing performance of PLA-basic, allowing its maximum volume flow rate to reach about 30mm³/s under the printing conditions of a Bambu P1 series machine with 0.4mm nozzle. PLA-basic material is easy to print, does not produce irritating odor, it is not easy to draw, the finished product does not warp, and has good molding quality. It is a cost-effective choice among 3D fast printing consumables.

Features

Printing material: Polylactic acid (PLA)
Printing colours: Black
Print speed: 300 mm/sec
Impact strength: 3.25 kJ/m²
Tensile modulus: 64.27 MPa
Flexural modulus: 3775.06 MPa
Flexural strength: 106.8 MPa
Maximum extruder tip temperature: 230 °C
Elongation at break: 4.61%
Minimum extruder tip temperature: 210 °C

Weight & dimensions

Density: 1240 kg/m³
Weight: 1 kg
Diameter: 1.75 mm

Packaging data

Quantity per pack: 1 pc(s)