Industrial 4G/LTE router

Industrial 4G/LTE router.
Features:
The industrial LTE router is designed to transmit data wirelessly over 4G LTE CAT4 / 3G mobile networks.
NXP industrial-grade processor.
Has an integrated cellular modem and SIM card function.
Ultra-low power consumption: from 1.9W in normal mode to max. 2.4W.
The router supports a wide operating temperature range from -40°C to +70°C. Rugged housing.
Technical data:
Supply voltage: 9-48V DC.
Power consumption: 1.9W (normal mode), max. 2.4W.
Operating temperature: -40~+70 °C.
Operating humidity: 0-95%RH non-condensing.
Size: 180x90x26 mm.
Safety class: IP30.
Case material: metal.
Installation: desktop/wall/DIN rail.
Weight: 271g.
Technical equipment:
CPU: 528MHz, ARM Cortex-A7.
RAM: 128Mb DDR3.
Flash memory: 128 Mb.
SIM card slot: 1x Mini SIM-2FF.
Reset button: 1x RST.
LED indicator: 1x power, 1x system, 1x SIM, 3x signal strength.
Built-in: watchdog, timer.
Antenna: 1x50ohm SMA connector.
Software:
Network protocols: IPv4/IPv6, PPP, PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, RIPv1/v2,
OSPF, DDNS, VRRP, HTTP, HTTPS, DNS, ARP, QOS, SNTP, Telnet, VLAN,
SSH, etc.
VPN: DMVPN, IPsec, OpenVPN, PPTP, L2TP, GRE.
Protection: Access Control, DMZ, Port Mapping, MAC Binding, SPI Firewalls,
DoSDDoS Protection, Filtering (IPDomain), IP Passthrough.
Management: Web, CLI, SMS, On-demand dial up, SNMP v1/v2/v3, DeviceHub (device hub).
Ethernet:
Ports: 1x WAN/LAN + 1x LAN.
Data transfer rate: 10Mbps / 100Mbps (IEEE 802.3).
Security: WPA/WPA2 authentication, WEP/TKIP/AES encryption.
Warranty: 24 months