Marten deterrent device, powered by a car battery, with plus-minus contact plates

A device for repelling martens with an electric impulse and high-frequency sounds. This high-quality and reliable deterrent can be used both in vehicles and at home. High-frequency sounds, flashing LEDs and 6 double high-voltage contact plates with plus + minus connection provide effective protection against damage. The high-frequency signals are irregular and randomly distributed to avoid habituation. Two-pin, double contact plates ensure that the marten will receive an electric shock in any case. They can be mounted in the engine compartment, in a carport, in a garden shed or directed towards the entrance. In this way, you will effectively scare away the animal before it is damaged. Special features: High-frequency sounds, flashing LEDs and 6 double high-voltage contact plates. Vibration switch that turns off the repeller when the engine is running. Different frequency against habituation. Characteristics: Ultrasonic sinusoidal sounds, randomly interrupting and changing the frequency against habituation. Microprocessor control. Vibration switch. which turns off the repeller when the engine is running and restarts it when parking LED indicator flashes to control ultrasound, high voltage + battery High-performance piezoelectric speaker with curved ALU diaphragm for wide wave transmission E1 certified On/off switch TECHNICAL DATA: Batteries: : 4 x AA (UM 3 Mignon, alkaline) required -manganese or similar of good quality) Power consumption: Ø approx. 0.25 mA Battery life: approx. 1 year, depending on the quality of the battery. Switch: There is an on/off switch on the side of the device. Loudspeaker: High-power piezoelectric loudspeaker with an aluminum diaphragm in the shape of a bowl. wide surface to emit sound. Acoustic pressure: max. approx. 105 dB ±20% Ultrasound: sinusoidal, interrupted at random intervals, with variable frequency to avoid the effect of habituation. (one pulse approx. every 9 - 30 seconds, approx. 21 - 24.5 kHz). High voltage : approx. 220 - 260 V/DC. Indicator on 3 LEDs : pulsating to control the ultrasound, high voltage + battery. Vibration switch : built-in vibration switch that disconnects the deterrent device when the engine is running and reactivates it after parking (the engine is not running). Temperature range : approx. -20 to +80°C (also dependent on the batteries used, which usually have a limited temperature range). Approval mark : yes, e1 certificate from the German Federal Road Traffic Office Dimensions : approx. 140 x 100 x 43 mm (without switch) Dimensions of 2-pole high-frequency pulse plates : approx. 60 x 60 x 12 mm. Plus + minus contacts on 2 levels A device for repelling martens, powered by a car battery, with plus-minus contact plates - a perfect way to solve the pest problem! The presence of pests in our immediate surroundings can lead to a large amount of losses, which are then difficult to accept. Contrary to appearances, we can easily reduce the frequency of this type of situations. A marten deterrent, powered by a car battery, with plus-minus contact plates may be the perfect solution for getting rid of small predatory animals from around our vehicle. Forget about faults caused by biting wires or other important elements needed for effective starting or operation of our car. Take an interest in our assortment! Our store offers the highest quality equipment that will satisfy even the most demanding customers. Check it out for yourself and join the group of satisfied consumers!